In an electrical system such as guitar effects pedals, a ground loop usually refers to a current, generally unwanted, in a conductor connecting two points that are supposed to be at the same potential, often ground, but are actually at different potentials.
Ground loops can cause noise hum as well as potential electric shocks which can be quite dangerous. The best way to prevent ground loops is isolation.
By isolating every output, the Voodoo Lab Pedal Power 2 Plus eliminates tone robbing interaction between many varied units.
This power supply can power vintage overdrives, loopstations, whammy pedals, 70's phaser units, modern digital distortions, multi-effects - anything you can think of, the Pedal Power 2 Plus has you covered.
A custom designed, ultra-low noise toroidal transformer, with separate balanced windings for every output ensures that even your most sensitive pedals can be dead quiet.
Using an audiophile quality linear supply, the Pedal Power 2 Plus delivers consistently stable, clean, pure power.
Order online from Kosmic today and get one of the top pedal supply units on the market delivered to almost anywhere in Australia.
9/12V (x4) – Standard 9V and 12V Boss ACA
With each one of these four outputs delivering 100mA, you can easily power any 9V battery-operated pedals. Any one of these outputs can be individually selected to run at 9V or 12V.
9V (x2) – High Current 9V and Line 6 Modelers
These two outputs each deliver 250mA allowing you run high current draw effects like the Boss DD-20 Giga Delay or Line 6 DL4 Delay Modeler.
- 9V (x2) – Standard 9V With Battery Sag Control
These outputs each have an available 100mA of power, but also allow you to SAG the voltage from roughly 4V to 9V.
18V/24V – Using Custom Cables
All of the outputs on the Pedal Power 2 Plus (and the original Pedal Power) are completely isolated allowing you to create different voltages. You can run effects like the current MXR Flanger by combining two 9V outputs to create a single 18V supply.
|Unit Of Measure||EACH|